Ver. 1.07.02 (01 Jul 2024)
Fixed:
- Calibration zero lost after firmware update or in case of low battery condition
- Weighings stored in alibi memory lost after firmware update or in case of low battery condition
|
Ver. 1.07.01 (02 Dec 2022)
Correzioni
- Printouts: if printing of header/footer is disabled, printing is not executed
- TMU295 printer: ticket not release after printing is concluded
|
Ver. 1.07.00 (04 Nov 2022)
Added
- First firmware revision with service software Instrument Manager support
- Printouts: customized footer available
Fixed
- ASCII protocol: with NETEN parameter enabled, semi-automatic tare and preset tare are allowed yet
|
Ver. 1.06.01 (12 Aug 2022)
Internal changes without any impact on the user |
Ver. 1.06.00 (25 Feb 2022)
Added
- First firmware release NTEP certified
- Printer: EPSON TMT20III supported
|
Ver. 1.05.05 (02 Oct 2019)
Fixed
- MODBUS-RTU protocol: 100 command code executes a semi-automtaic zero and not a tare weight zero setting
|
Ver. 1.04.05 (17 May 2019)
Internal changes without any impact on the user |
Ver. 1.04.04 (08 Feb 2018)
Changed
- Legal for trade instrument: WEIMOD protocol available, for weight value reading via serial communication
- Legal for trade instrument: qualified access to legally relevant parameters lost when the instrument is swithced off
- PLUSII printer: in the line dividing two printouts, sequence '::::::' used instead of '......'
- Zero value manual entry: the parameter value is applied only when it's modified
Fixed
- Use with multichannel transmitters: in case of legal for trade weighing system, qualifed access to legally relevant parameter doesn't work if communiucation between indicator and transmitter is not working
- Use with multichannel transmitters: parameters related to zero tracking function not correctly saved in the internal memory, causing the function do not correctly work
|
Ver. 1.04.03 (10 Jan 2017)
Added
- Printouts: introduced number of blank lines before the input weigh printout and number of blank lines before the output weigh parameters
Changed
- Printouts: for single weighings, parameter number of blank lines before the input weigh is used as setting
- Printouts: for single weighings, LOADED/UNLOADED row moved to the end of the printout
Fixed
- Multichannel transmitters management: peak weight detection function not working
|
Ver. 01.04.00 (23 Sep 2016)
Added
- Parameters setting: a new parameter, NETEN, is available in CALIB menu, to enable/disable semi-automatic tare and preset tare functions
Changed
- When a tare is active, it's automatically removed only if a weighing operation is successfully completed
|
Ver. 1.03.00 (15 Jul 2016)
Added
- Multichannel transmitters management: in case of CLM8 transmitter, 16 channels mode available. It allows and indicator to commuicate with two CLM8s, to get a 16 independent channels weighing system
Fixed
- Multichannel transmitters management: real calibration, with sample weights, not correctly executed
- CONTIN communication protocol: data transmission halted after a semi-automatic zero execution
- Legal for trade instrument, alibi memory: for MODBUS-RTU protocol, the specific status register bit, signalling an ongoing memory search, is not working correctly
|
Ver. 1.01.16 (01 Jul 2016)
Added
- Weighings storage and printing conditions: added NONE option. Weighings storage and priniting allowed also if weight value is not changed
- Legal for trade instrument, zero tracking: allowed range for the parameter extended to 50 e/10 (thenths of e)
Fixed
- Legal for trade instrument, automatic zero setting at power-on: tare needed to zero the weight value is not correctly calculated. Current weight value, when startup is concluded, is not equal to 0
|
Ver. 1.01.14 (17 Mar 2016)
Fixed
- Use with multichannel transmitters: tare weight zero setting is not working correctly
- Not legal fo trade instruments: due to internal backup battery issues, tare weight zero is zeroed, assuming all the calibration is lost
|
Ver. 1.01.12 (19 Sep 2015)
Internal changes without any impact on the user |
Ver. 1.01.11 (19 Sep 2015)
Fixed
- Printouts: STAVQ printer not correctly managed during some tickets printing
|
Ver. 1.01.09 (09 Sep 2015)
Fixed
- NOTLEG program enabled: automatic zero setting at power-on not working
|
Ver. 1.01.07 (01 Jul 2015)
Changed
- MASMUL communication protocol: user can select it, only after enable ESTYES option during program selection
|
Ver. 1.01.04 (04 Jun 2015)
Fixed
- Communication with multichannel transmitters: load percentages on each channel reading incorrect
|
Ver. 1.01.03 (07 May 2015)
Internal changes without any impact on the user |
Ver. 1.01.08 (06 Aug 2012)
Fixed
- Use with multichannel transmitters: when a semiautomatic tare is executed, the current weight value is no more updated on the indicator display
- Preset tare database: password mechanism, to access the database, not working correctly
|
