Ver. 1.11.10 (02 Jul 2024)

Fixed:

• Low battery condition signalled with delay

Ver. 1.11.08 (14 Jun 2024)

Fixed:

• Zero setting and alibi memory are kept after update and after low battery buffer error

Ver. 1.11.06 (15 Jan 2024)

‫Internal changes without any impact on the user

Ver. 1.11.04 (27 Dec 2023)

Fixed

•  Batching start with external contact. instrument freezed and display showing message 'F        X'

Ver. 1.11.00 (01 Dec 2023)

Added:

• Label printer management, in case of Zebra models or printers supporting ZPL programming language
• Semiautomatic or predetermined tare maintained at the start of a batching sequence
• Full management of batching functions allowed in case of Profinet-IO, Ethernet/IP, CANOpen and DeviceNET communication interfaces

Fixed:

• Legal for trade mode, NTEP: Pounds available as unit of measure

Modified:

• The following functions, regarding batching programs, can be freely activated by the user:
  • Intermediate unloadings
  • Cycle end partial unloadings
  • Setting of a quantity to be batched greater than the scale capacity
  • Setting formulas in percentages
  • Displaying of batching data on remote displays

Ver. 1.10.20 (08 Jun 2023)

Fixed

Preset tare: corrected mV/weight calculation with piece conuter mode. Corrected field bus setting

Ver. 1.10.16 (09 Mar 2023)

Fixed

• Semi-automatic zero from input doesn't control alarm conditions

Ver. 1.10.14 (15 Nov 2022)

Fixed

• Device's programs wasn't selected correctly

Ver. 1.10.12 (11 Nov 2022)

Fixed

• Batching programs wrongly recognized by Instrument Manager

Ver. 1.10.10 (10 Nov 2022)

Fixed

Added error message in case of USB port malfunction ("USB KO")

Ver. 1.10.08 (11 Oct 2022)

Fixed

• Correct quick access to the tare weight zero setting

Ver. 1.10.04 (04 Aug 2022)

Fixed

• Corrections when operating with intelligent junction box
• Corrections to real calibration via Instrument Manager
• Corrections to ASCII protocol

Ver. 1.10.04 (04 Aug 2022)

Fixed

• Corrections when operating with intelligent junction box
• Corrections to real calibration via Instrument Manager
• Corrections to ASCII protocol

Ver. 1.10.02 (25 Mar 2022)

Fixed

• ASCII protocol: NET command lights up the corresponding LED but the weight is not zeroed

Ver. 1.10.00 (17 Feb 2022)

Added

• NTEP compliant version
• Add EPSON TMT20III printer type

Fixed

• Removed restriction on the voltage/current value produced by the analog output related to calculated weight

Ver. 1.09.06 (13 Jul 2021)

Fixed

• Setting weight to zero by input 1 doesn't show error message "t-----"

Ver. 1.09.05 (11 Jun 2021)

Fixed

• Fix parameters GATEWAY, SUBNET MASK managements for OPZW1RADIO

Ver. 1.09.04 (20 Oct 2020)

Fixed

• Update firmware via Instrument Manager: Set program and options before erase step. Fix menu items visualization.
• INFO menu: active options wrong visualization

Ver. 1.09.02 (29 Sep 2020)

‫Internal changes without any impact on the user

Ver. 1.09.00 (21 Sep 2020)

Added

• First release Instrument Manager compliant (Version 1.1.0)
• Remote real calibration up to 8 points, added by command 106. Values can be negative.
• PEAK input function run via the START/STOP key

Ver. 1.08.24 (22 Jun 2020)

Fixed

• Continuous weight transmission: doesn't display NO COM message when serial communication doesn't work

Ver. 1.08.22 (23 Jan 2020)

Added

• Connected to junction box: Add tilt alarm visualization  (tilt, comm, maxx, maxy)

Fixed

• Connected to junction box: weight values aren't refreshed after change division

Ver. 1.08.20 (18 Dec 2019)

FIXED

• UNLOAD: fix SET closing contact during batching after enter in the menus 

Ver. 1.08.18 (20 May 2019)

Fixed

• Setting P1 turn on input led 1

Ver. 1.08.16 (02 Apr 2019)

Fixed

• ASCII: Commands 'z' and 's' doesn't reply 0 and setted sample weight
• HDRIP protocol: reply gross weight instead net weight
• Wrong visibility on approved program of IN3 and EC with analog option

Ver. 1.07.70 (08 Feb 2019)

‫Internal changes without any impact on the user

Ver. 1.07.68 (19 Jan 2019)

‫Internal changes without any impact on the user

Ver. 1.07.66 (05 Jan 2019)

‫Internal changes without any impact on the user

Ver. 1.08.14 (22 Dec 2018)

Fixed

Analog Output: not save all parameters when operating mode is changed (from current to tension). At start up the instrument does not work properly.

Ver. 1.08.12 (07 Dec 2018)

Fixed

• UNLOAD program: no display of ALARM menu

Ver. 1.08.10 (09 Nov 2018)

Added

• Peak weight management from button
• Unlock menu with password
• Add input LIMIT SWITCH mode 
• NET EN mode: if YES, disable tare functions on approved program instrument
• WEIMOD: add on approved program instrument

Ver. 1.07.64 (17 Oct 2018)

Added

CONTIN: add functionality for TCP-IP on serial 3

Ver. 1.07.42 (23 Aug 2018)

‫Internal changes without any impact on the user

Ver. 1.07.40 (18 Jul 2018)

‫Internal changes without any impact on the user

Ver. 1.07.62 (17 Jul 2018)

Added

• With OPZW1RADIO is possible to manage instrument TLKWF as junction box (MASMUL mode on series W serial communication)

Correzioni

•  Access to legally relevants parameters lost at switch off
• IMP0: the value is set only if the actual value is changed
• ALIFUL message: can be resetted by Modbus
• PARSER alarm (Batching): pressing ENTER all formulas are rewritten automatically
• FS-TEO: Parameter can't be changed
• USB option: managed diffetent USB model types
• Autotare delay and Stable tare must be visible only in LOAD programs
• By displaying gross weight while net weigth is set, NET/GROSS led does not update correctly
• In case of multiple print with access to legal parameter instrument the alibi ID was incremented in the print copies
• Fix tare rounding with access to legal parameters instrument
• Intelligent junction box: even without communication, legal parameter access is managed with password on the transmitter
• Intelligent junction box: fixed display of negative percentages in diagnostics
• Intelligent junction box: fixed peak weight management
• Intelligent junction box: print diagnostic event does not print percentages
• Intelligent junction box: fixed filter A visualization

Ver. 1.07.22 (16 Apr 2018)

‫Internal changes without any impact on the user

Ver. 1.07.20 (23 Feb 2018)

Fixed

• After set WIFI option, in option menu is shown NONE instead of WIFI 
• With WIFI option on, in INFO menu is shown NO OPZ message

Ver. 1.07.10 (16 Nov 2016)

Added

• WDOS TOTAL: added continuos weight trasmission protocol. Repeater instrument shows TOTAL weight.

Ver. 1.07.08 (29 Sep 2016)

Fixed

• Modbus-TCP/IP: wrong menu visibility

Ver. 1.07.06 (28 Sep 2016)

Fixed

• Filter non visible in batching programs

Ver. 1.07.04 (23 Aug 2016)

Fixed

• Updated opzw1radio management
• Profinet-IO: Real calibration works in a system composed by an indicator and an intelligent junction box

Ver. 1.06.32 (13 Jul 2016)

‫Internal changes without any impact on the user

Ver. 1.06.30 (17 Jun 2016)

Fixed

• Research in progress (Alibi) bit in Modbus status register was not refreshed

Ver. 1.06.28 (05 May 2016)

‫Internal changes without any impact on the user

Ver. 1.06.26 (22 Mar 2016)

Fixed

• Contrast value visualization

Ver. 1.06.24 (17 Mar 2016)

‫Internal changes without any impact on the user

Ver. 1.06.22 (11 Feb 2016)

Fixed

• No comparison time: load batching program not correctly managed

Ver. 1.06.20 (17 Jun 2015)

Fixed

• Preset Tare applied for pieces count
• Profinet-IO: change store parameters in eeprom. Legal for trade instrument: instrument working extremely low

Ver. 1.06.16 (18 Mar 2015)

Added

• Weigth input selectable from serial options

Ver. 1.06.14 (09 Feb 2015)

Fixed

• RIPLAU protocol blocks the instrument

Ver. 1.06.10 (23 Jun 2014)

Added

• Profinet IO: Parameters IP ADDR, GATEWAY and MASK can be write and store from fieldbus 

Fixed

• Outputs management
• Inputs management on TOTAL Program
• Contin Protocol on TCP/IP
• Setpoints reading on Modbus