Ver. 1.03.10 (02 Jul 2024)

Fixed:

• Low battery condition signlled with delay

Ver. 1.03.08 (01 Jul 2024)

Fixed:

• Zero setting and alibi memory are kept after update and after low battery buffer error

Ver. 1.03.06 (02 Feb 2024)

Fixed

• MODBUS/TCP option: ETHERNET menu wrongly visibile
• Battery charge level icon not correctly shown on the instrument display

Ver. 1.03.04 (27 Dec 2023)

Fixed

• Batching start with external contact. instrument freezed and display showing message 'F        X'

Ver. 1.03.02 (12 Dec 2023)

Fixed:

• Visibility menu Wifi

Ver. 1.03.00 (01 Dec 2023)

Added:

• Label printer management, in case of Zebra models or printers supporting ZPL programming language
• Semiautomatic or predetermined tare maintained at the start of a batching sequence
• Full management of batching functions allowed in case of Profinet-IO, Ethernet/IP, CANOpen and DeviceNET communication interfaces

Fixed:

• Legal for trade mode, NTEP: Pounds available as unit of measure

Modified:

• The following functions, regarding batching programs, can be freely activated by the user:
  • Intermediate unloadings
  • Cycle end partial unloadings
  • Setting of a quantity to be batched greater than the scale capacity
  • Setting formulas in percentages
  • Displaying of batching data on remote displays

Ver. 1.01.20 (02 Aug 2023)

Fixed

• Full screen mode: unit of measure not correctly displayed

Ver. 1.01.18 (14 Jul 2023)

Fixed

• Item database: instrument slowdown after an item, with a preset tare value associated, is selected

Ver. 1.01.16 (08 Jun 2023)

Fixed

• Preset tare: fixed mV/weight calculation with piece counter mode
• Preset tare: fixed execution by remote

Ver. 1.01.10 (28 Sep 2022)

Fixed

• Batching programs: autotare function not correctly initialized during instrument reset to default

Ver. 1.01.08 (15 Sep 2022)

• Fixed
• Fixed semi-automatic zero function working
• ASCII protocol: fixed execution of semi-automtic zero and semi-automatic tare commands
• Batching programs: fixed buffer battery discharged signaling

Ver. 1.01.06 (02 Aug 2022)

Fixed

• Instrument freezed in case of batching resume after a blackout

Ver. 1.01.04 (18 Mar 2022)

‫Internal changes without any impact on the user

Ver. 1.01.02 (06 Nov 2021)

Fixed

• NTEP legal for trade instrument: ECCALP reference number not increased after an execution by remote of tare weight setting or  real calibration with sample weight

Ver. 1.01.00 (29 Jun 2021)

Added

• First firmware version NTEP certified

Ver. 1.00.46 (11 Jun 2021)

• Totalizer, automatic type: minimum weight not stored when in range 2

Ver. 1.00.44 (05 Jun 2021)

Fixed

• OPZWQMC: instrument freezed pressing ESC key during total quantity to be batched setting

Ver. 1.00.42 (09 Jan 2021)

‫Internal changes without any impact on the user

Ver. 1.00.40 (08 Dec 2020)

Fixed

• WEIMOD protocol: during instrument startup, instrument halts and ESC or ENTER key pressed is necessary to unlock it

Ver. 1.00.38 (17 Nov 2020)

Fixed

• Program setting and configuration: in case of a batching program is selected, CELL/SERIAL selection not visible in the instrument configuration menu

Ver. 1.00.36 (12 Sep 2020)

• Fixed
• Instrument management by remote: command code 130, to apply a preset tare, not working in case of NOT legal for trade instrument

Ver. 1.00.34 (31 Jan 2020)

Fixed

• Profinet-IO interface installed and active:  ON/OFF key reading not correctly working

Ver. 1.00.32 (31 Oct 2019)

Fixed

• Alibi memory: during weighing data storing, some weighings, previously stored in memory, are lost

Ver. 1.00.28 (26 Oct 2018)

Fixed

• Statistical checking of prepackages: fixed  tolerance zones calculation
• Error messages related to the calculated weight, correclty displayed in the right side of the display

Ver. 1.00.26 (04 May 2018)

Added

• Printouts: in case of STAVT and STAVP printers, customized header available

Ver. 1.00.24 (08 Mar 2018)

• Fixed
• At the batching start, instrument crashes after number of cycles setting

Ver. 1.00.22 (10 Feb 2018)

Changed

• Printouts:
  • PLUSII printer: in the line dividing two printouts, used sequence '::::::' instead of '......'
  • Legal for trade instrument, totalizer printouts: message CALCULATED used insted of NOT LEGAL

Fixed

• Legal for trade instrument, multirange calibration: preset tare visualization not correct
• Instrument LEDs not correctly managed in case of gross weight visualization, when a tare is active

Ver. 1.00.20 (02 Mar 2017)

Fixed

• OPZW1RADIO option parameters not correctly initialized in case of reset to default procedure

Ver. 1.00.18 (29 Sep 2016)

Fixed

• FILTER menu not visible in case of batching program

Ver. 1.00.16 (28 Sep 2016)

Added

• OPZW1RADIO option management
• Fixed
• Legal for trade instrument: automatic zero setting at power-on ,calculation adjusted
• Automatic totalizer: instrument crash when totalitazion executed

Ver. 1.00.14 (11 Apr 2016)

Fixed

• In case of not legal for trade program, calibration zero value lost when low buffer battery level

Ver. 1.00.12 (10 Mar 2016)

Fixed

• Functions enabled by a long key pression trigger a not correct update of the display content