Certifications

QUALITY MANAGEMENT SYSTEM CERTIFICATION according to UNI EN ISO 9001:2015
ENVIRONMENTAL MANAGEMENT SYSTEM CERTIFICATION according to UNI EN ISO 14001 2004
obtained through TÜV Italia, a body belonging to the large international group TÜV SÜD

LAUMAS is a LAT calibration laboratory No.325 accredited by Accredia, in compliance with the international standard ISO/IEC 17025 “General requirements for the competence of testing and calibration laboratories”.

MODULE D: CONFORMITY TO TYPE BASED ON QUALITY ASSURANCE OF THE PRODUCTION PROCESS, issued by a Notified Body and applicable to non-automatic weighing instruments. LAUMAS is able to independently perform the CE-M Conformity / Homologation assessment on instruments with an "EU type" examination certificate stating that that particular instrument is suitable for legal use in relation to third parties (Directive 2014/31 / EU) .

LAUMAS is able to provide equipment marked ATEX with "EU Type examination" Certificate for use in a potentially explosive atmosphere (Directive 2014/34/EU - ATEX ; zone 0-1-2 gas ; zone 20-21-22 dust).

LAUMAS is able to provide equipment marked IECEx with "IECEx CoC" Certificate for use in potentially explosive atmospheres (Standards: IEC 60079-0, 60079-11, 60079-31, 60079-15; zone 0-1-2 gas ; zone 20-21-22 dust).

This Certificate indicates that the product complies with the Eurasian Customs Union regulations (Russia, Belarus, Armenia, Kyrgyzstan and Kazakhstan). TR CU 020 Standards. The EAC mark replaces the GOST.

LAUMAS is able to provide equipment marked EAC Ex with Certificate of Conformity for use in potentially explosive atmosphere in the Eurasian Customs Union (Russia, Belarus, Armenia, Kyrgyzstan and Kazakhstan). TR CU 012 Standards; zone 0-1-2 gas ; zone 20-21-22 dust.

This Certificate indicates that the product meets recommendations defined by International Organization of Legal Metrology (OIML).
OIML R60: Metrological regulation for load cells.
OIML R61: Automatic gravimetric filling instruments.
OIML R51: Automatic catchweighers.
OIML R76: Metrological and technical requirements for non-automatic weighing instruments.

This Certificate indicates that the component, intended for use in a complete product or system, meets UL/CSA requirements in accordance with the U.S. and Canadian regulations.

This Certificate indicates that the product meets applicable technical requirements of Handbook 44 published by the National Institute of Standards and Technology (NIST) for the National Conference on Weights and Measures (NCWM). This Certificate indicates that the device meets applicable requirements for commercial weighing and measuring equipment in the U.S. (for legal for trade use).

NMI Trade Approved - This Certificate indicates that the product complies with the Australian standards for legal for trade use. Regulation 60 of the National Measurement Regulations 1999, with reference to NMI R 76 standard (Non-automatic weighing instruments).

This certificate indicates that the product complies with the Weights and Measures Regulations 1999 for legal for trade use.

This certificate "Pattern Approval Certificate" certifies that the product complies with the legal metrology regulations of the Russian Federation for weighing instruments for legal for trade use.

The certificate indicates that the product complies with the "Non-Automatic Weighing Instruments Regulations 2016" for legal for trade use.

This certificate indicates that the product complies with the weights and measures regulations of the People's Republic of China for legal-for-trade use.

The CE marking certifies the product’s compliance with all the EU regulations providing for its application: from product design to manufacture, placing on the market, putting into service and eventually disposal.

The UKCA (UK Conformity Assessed) marking is the equivalent of the CE marking for the United Kingdom.

American standard that regulates the design, production and use of hygienic equipment. The aim is to protect the final product from the risks associated with contamination and bacterial proliferation.

UNI EN 1090 certification attests to the traceability, repeatability and high quality of the production process and of the control methods to which LAUMAS mounting kits are subjected, as structural components of plant and machinery.

The certificate guarantees that the product is compliant with US and Canada regulations for use in potentially explosive atmospheres.

This certificate guarantees that the product is compliant with the regulations of the People's Republic of China for use in a potentially explosive atmosphere.

The certificate indicates that the product complies with sections 14 and 15 of the Weights and Measures Regulations / Règlement sur les poids et mesures for legal for trade use.