Webinars & Tutorials

Installation of a weighing system

1. Load cells installation, capacity, support plates, mounting surfaces, single point load cells

Description

Capacity and support plates for shear beam/bending beam/single point load cells.

Duration: 00h 02m 32s

Date: 18 December 2019

Read the
blog

Installation of a weighing system

1. Load cells installation, capacity, support plates, mounting surfaces, single point load cells

2. Load cells installation; mechanical constraints; frictions; check for correct installation

3. Load cells connected in parallel; 4 or 6 wire cables; distance from power cable

4. Welding. Recommendations for welding with already installed load cells

5. Constraints against horizontal forces and anti tilt

6. Silo weighing/structures with legs

7. Electrostatic charges. Grounding of the weighed structure

8. Guidelines for the installation of weight indicators and weight transmitters

Guidelines for the correct installation of load cells, weight indicators and weight transmitters

Configuration of weighing instruments

Wiring of multichannel weight transmitters

Diagnostics in multichannel weight transmitters

Equalization in multichannel weight transmitters

Calibration in weight indicators and weight transmitters

Connection of a LCB universal digitizer to a load cell

Communication with weighing instruments

Integration, via EDS file, of an ETHERNET / IP weight transmitter into RSLogix 5000

Integration, via generic module, of an ETHERNET / IP weight transmitter into RSLogix 5000

Integration of an EtherCAT weight transmitter in sysmac studio

Integration of a PROFINET weight transmitter in the TiA portal