Ver. 1.04.04 (20 May 2024)

Fixed

• RS485 + Analog output: output  current costant, not changing depending from the calculated weight value

Ver. 1.04.03 (08 May 2024)

Fixed

• SERCOS III: cyclic data writing on the instrument not working

Ver. 1.04.02 (14 Nov 2023)

Added

• Added Instrument Manager support
• Added weighing filters
• Added calibration via characterization values of the load cell
• Added real calibration points, it is now possible to linearize up to 8 points
• Added CCLINKIE fieldbus

Modified

• Improved weighing elaboration rate up to 500 weights per second
• Improved fieldbus transmission rate up to 500 weights per second (fieldbus dependant)
• Modified instrument status address
• Updated command register commands feedback 

Removed

• Removed LCB Manager support

Note

• It is not possible to update the firmware from versions prior to 1.04.00

Ver. 1.03.00 (04 Oct 2022)

Added

• Modbust/TCP, Ethernet menu: Gatway enable and DHCP items available

Ver. 1.02.03 (27 Nov 2020)

Fixed

• Modbus/TCP: IP address setting is not possible, unless setting Subnet Mask to 0.0.0.0

Ver. 1.02.02 (30 Oct 2019)

Internal changes without any impact on the user

Ver. 1.02.00 (28 Sep 2019)

Internal changes without any impact on the user

Ver. 1.00.09 (06 Apr 2019)

Changed

• Ethernet menu, Gateway parameter: default value set to 0.0.0.0
• Ethernet menu, IP address parameter: default value set to 10.2.0.170

Fixed

• Profinet IO, Ethernet/IP, EtherCAT, Powerlink: data on filedbus not correctly managed in case of Swap parameter set to Little Endian. SR2 and IS data are reversed

Ver. 1.00.08 (24 Oct 2018)

Internal changes without any impact on the user

Ver. 1.00.07 (18 Jul 2018)

Internal changes without any impact on the user

Ver. 1.00.06 (18 Jul 2018)

Internal changes without any impact on the user

Ver. 1.00.05 (12 Jun 2018)

Fixed

• Theoretica full scale management

Ver. 1.01.00 (31 May 2018)

Internal changes without any impact on the user

Ver. 1.00.03 (12 May 2018)

Fixed

• Profinet IO name assignment not correct

Ver. 1.00.02 (18 Apr 2018)

Added

• First official release