Ver. 1.03.10 (02 Jul 2024)

Fixed:

• Low battery condition signlled with delay

Ver. 1.03.08 (01 Jul 2024)

Fixed:

• Zero setting and alibi memory are kept after update and after low battery buffer error

Ver. 1.03.06 (02 Feb 2024)

Fixed

• MODBUS/TCP option: ETHERNET menu wrongly visibile
• Battery charge level icon not correctly shown on the instrument display

Ver. 1.03.04 (27 Dec 2023)

Fixed

• Batching start with external contact. instrument freezed and display showing message 'F        X'

Ver. 1.03.02 (12 Dec 2023)

Fixed:

• Visibility menu Wifi

Ver. 1.03.00 (01 Dec 2023)

Added:

• Label printer management, in case of Zebra models or printers supporting ZPL programming language
• Semiautomatic or predetermined tare maintained at the start of a batching sequence
• Full management of batching functions allowed in case of Profinet-IO, Ethernet/IP, CANOpen and DeviceNET communication interfaces

Fixed:

• Legal for trade mode, NTEP: Pounds available as unit of measure

Modified:

• The following functions, regarding batching programs, can be freely activated by the user:
  • Intermediate unloadings
  • Cycle end partial unloadings
  • Setting of a quantity to be batched greater than the scale capacity
  • Setting formulas in percentages
  • Displaying of batching data on remote displays

Ver. 1.01.20 (02 Aug 2023)

Fixed

• Full screen mode: unit of measure not correctly displayed

Ver. 1.01.18 (14 Jul 2023)

Fixed

• Item database: instrument slowdown after an item, with a preset tare value associated, is selected

Ver. 1.01.16 (08 Jun 2023)

Fixed

• Preset tare: fixed mV/weight calculation with piece counter mode
• Preset tare: fixed execution by remote

Ver. 1.01.10 (28 Sep 2022)

Fixed

• Batching programs: autotare function not correctly initialized during instrument reset to default

Ver. 1.01.08 (15 Sep 2022)

• Fixed
• Fixed semi-automatic zero function working
• ASCII protocol: fixed execution of semi-automtic zero and semi-automatic tare commands
• Batching programs: fixed buffer battery discharged signaling

Ver. 1.01.06 (02 Aug 2022)

Fixed

• Instrument freezed in case of batching resume after a blackout

Ver. 1.01.04 (18 Mar 2022)

Internal changes without any impact on the user

Ver. 1.01.02 (06 Nov 2021)

Fixed

• NTEP legal for trade instrument: ECCALP reference number not increased after an execution by remote of tare weight setting or  real calibration with sample weight

Ver. 1.01.00 (29 Jun 2021)

Added

• First firmware version NTEP certified

Ver. 1.00.46 (11 Jun 2021)

• Totalizer, automatic type: minimum weight not stored when in range 2

Ver. 1.00.44 (05 Jun 2021)

Fixed

• OPZWQMC: instrument freezed pressing ESC key during total quantity to be batched setting

Ver. 1.00.42 (09 Jan 2021)

Internal changes without any impact on the user

Ver. 1.00.40 (08 Dec 2020)

Fixed

• WEIMOD protocol: during instrument startup, instrument halts and ESC or ENTER key pressed is necessary to unlock it

Ver. 1.00.38 (17 Nov 2020)

Fixed

• Program setting and configuration: in case of a batching program is selected, CELL/SERIAL selection not visible in the instrument configuration menu

Ver. 1.00.36 (12 Sep 2020)

• Fixed
• Instrument management by remote: command code 130, to apply a preset tare, not working in case of NOT legal for trade instrument

Ver. 1.00.34 (31 Jan 2020)

Fixed

• Profinet-IO interface installed and active:  ON/OFF key reading not correctly working

Ver. 1.00.32 (31 Oct 2019)

Fixed

• Alibi memory: during weighing data storing, some weighings, previously stored in memory, are lost

Ver. 1.00.28 (26 Oct 2018)

Fixed

• Statistical checking of prepackages: fixed  tolerance zones calculation
• Error messages related to the calculated weight, correclty displayed in the right side of the display

Ver. 1.00.26 (04 May 2018)

Added

• Printouts: in case of STAVT and STAVP printers, customized header available

Ver. 1.00.24 (08 Mar 2018)

• Fixed
• At the batching start, instrument crashes after number of cycles setting

Ver. 1.00.22 (10 Feb 2018)

Changed

• Printouts:
  • PLUSII printer: in the line dividing two printouts, used sequence '::::::' instead of '......'
  • Legal for trade instrument, totalizer printouts: message CALCULATED used insted of NOT LEGAL

Fixed

• Legal for trade instrument, multirange calibration: preset tare visualization not correct
• Instrument LEDs not correctly managed in case of gross weight visualization, when a tare is active

Ver. 1.00.20 (02 Mar 2017)

Fixed

• OPZW1RADIO option parameters not correctly initialized in case of reset to default procedure

Ver. 1.00.18 (29 Sep 2016)

Fixed

• FILTER menu not visible in case of batching program

Ver. 1.00.16 (28 Sep 2016)

Added

• OPZW1RADIO option management
• Fixed
• Legal for trade instrument: automatic zero setting at power-on ,calculation adjusted
• Automatic totalizer: instrument crash when totalitazion executed

Ver. 1.00.14 (11 Apr 2016)

Fixed

• In case of not legal for trade program, calibration zero value lost when low buffer battery level

Ver. 1.00.12 (10 Mar 2016)

Fixed

• Functions enabled by a long key pression trigger a not correct update of the display content