网络研讨会和辅导课程

Communication with weighing instruments

Integration, via EDS file, of an ETHERNET / IP weight transmitter into RSLogix 5000

Description

How to integrate a LAUMAS ETHERNET / IP weight transmitter into an automation system based on Allen Bradley PLC, using an EDS file for data exchange configuration.

Time: 00h 16m 41s

Date: 30 三月 2022

Read the
blog
Explore

Installation of a weighing system

#1
1. Load cells installation, capacity, support plates, mounting surfaces,single point load cells (en)
2m 32s
#2
2. Load cells installation; mechanical constraints; frictions; check for correct installation (en)
1m 38s
#3
3. Load cells connected in parallel; 4 or 6 wire cables; distance from power cable (english)
1m 22s
#4
4. Welding. Recommendations for welding with already installed load cells (english)
42s
#5
5. Constraints against horizontal forces and anti tilt (english)
1m 50s
#6
6. Silo weighing/structures with legs (english)
37s
#7
7. Electrostatic charges. Grounding of the weighed structure (english)
1m 12s
#8
8. Guidelines for the installation of weight indicators and weight transmitters (english)
1m 33s
#9
Guidelines for the correct installation of load cells, weight indicators and weight transmitters(en)
9m 30s

Configuration of weighing instruments

#1
Wiring of multichannel weight transmitters (english)
3m 10s
#2
Diagnostics in multichannel weight transmitters (english)
6m 12s
#3
Equalization in multichannel weight transmitters (english)
5m 28s
#4
Calibration in weight indicators and weight transmitters (english)
5m 43s
#5
Connection of a LCB digitizer to a load cell (english)
6m 05s

Communication with weighing instruments

#1
Integration, via EDS file, of an ETHERNET / IP weight transmitter into RSLogix 5000
16m 41s
#2
Integration, via generic module, of an ETHERNET / IP weight transmitter into RSLogix 5000
16m 10s
#3
Integration of an EtherCAT weight transmitter in sysmac studio
12m 24s
#4
Integration of a PROFINET weight transmitter in the TiA portal (english)
20m 31s