网络研讨会和辅导课程

Configuration of weighing instruments

Diagnostics in multichannel weight transmitters

Description

The diagnostic function in LAUMAS multichannel weight transmitters.

Time: 00h 06m 12s

Date: 18 十二月 2019

Read the
blog

Installation of a weighing system

1. Load cells installation, capacity, support plates, mounting surfaces,single point load cells (en)

2. Load cells installation; mechanical constraints; frictions; check for correct installation (en)

3. Load cells connected in parallel; 4 or 6 wire cables; distance from power cable (english)

4. Welding. Recommendations for welding with already installed load cells (english)

5. Constraints against horizontal forces and anti tilt (english)

6. Silo weighing/structures with legs (english)

7. Electrostatic charges. Grounding of the weighed structure (english)

8. Guidelines for the installation of weight indicators and weight transmitters (english)

Guidelines for the correct installation of load cells, weight indicators and weight transmitters(en)

Configuration of weighing instruments

Wiring of multichannel weight transmitters (english)

Diagnostics in multichannel weight transmitters (english)

Equalization in multichannel weight transmitters (english)

Calibration in weight indicators and weight transmitters (english)

Connection of a LCB digitizer to a load cell (english)

Communication with weighing instruments

Integration, via EDS file, of an ETHERNET / IP weight transmitter into RSLogix 5000

Integration, via generic module, of an ETHERNET / IP weight transmitter into RSLogix 5000

Integration of an EtherCAT weight transmitter in sysmac studio

Integration of a PROFINET weight transmitter in the TiA portal (english)